It is always important to have excellently constructed fences around your home, especially if you have a dog or any pet that can easily get in and out of the property.

If you put up the right kind of fences, you will keep your pets within your property and save them from any potential accidents.

Making a sturdy and long-lasting fence is not tough, once you follow the right steps, you can achieve the results you have always wanted.

Normally, you need to measure a 6 to 8 feet distance between the posts of the fence. This would be relative to the area where you are erecting the fence and the type of material that you choose. You also need to have a clear idea why you need to build a fence. After you have put up the corner posts, you can now begin building the posts between the corner spots.

You can use stakes to pierce into the ground at a distance of six feet each, depending on the location of the post.

A precise measurement is always important. Be careful that you maintain a good location between the posts. If you want to build a strong fence, you need to be able to establish the best position and location of the posts.

Wooden posts used for the fence need to be placed into the ground, with a measurement of ¼ length set deep into the ground. Burying the right length into the ground is important since this will help the fence achieve sturdiness and fight any exterior elements.

In order to excavate the ground properly, you need to use a post hole digger in order to achieve the right depth for the posts. With this, you are also making sure that the posts can bear the heaviness of the fences.

As you are setting the posts, specifically with the corner types, you need to shape the holes wider at the lower bottom than the top. Within each hole, you have to set down a rock as well as gravel to make sure that there is enough drainage.

Since the bottom part of the wood posts is subject to damp moisture, using a wood preservative will help seal them.

Moreover, using concrete with the setting of the posts will help them gain more stability. If you use concrete, you need to make certain that the posts are standing erect. This will help achieve a straighter-level fence.

Place a stake as marking at the back of the post and wait for the concrete to dry. Then you can remove the stakes afterwards.

It is necessary for the corner posts to have the proper bracing, in order to carry the weight properly.

If you set the posts in a straight manner this will help your fence achieve better strength.

You also need to treat the top of your posts. Moreover, cutting it in a slant manner at the top will help prevent water accumulation.

Make certain the posts are in level ground. Cover the bottom of the posts with heaps of soil to keep excess water from making a pool.

Connecting the Rails

You are faced with three methods when it comes to rail connection. The most commendable means is to screw the rail on the fence and onto the post. You also need to nail the rail at the bottom part of the fence and post.

As you are doing the fence attachments, you need to get the accurate measurements from the top rail and place a stick to make the fence in uniform.

Your choices for fencing are actually diverse and you can choose among the different kinds or any slight variation from the original types.

As for the barrier fencing, you are able to maintain the best levels of privacy for the home and the rest of the family members. For more decorative purposes, you can choose the split rail.

Preparation is always needed before choosing any specific type of fence. You have to check the entire area of your property and see if there are any regulations within the area. Most rulings require that your fence need to be least 3 feet away from the property line.

What You Need To Prepare

• Posts
• Boards
• Digger for the Post Hole
• Steel Tapes
• Nails
• Hammer
• Hatchet
• Chisel
• Level
• Wood Preservative
• Marking Pencil
• Power Saw
• Paint
• Saw
• Gravel
• Concrete
• Tamping Rod
• Work Gloves